العربية
Labeling machines are now more and more widely used in various fields and industries, but the purchase and description of labeling machines must be purchased from regular labeling machine manufacturers.
The labeling machine literally understands the "labeling" of bottles. It is to attach the label to the object. If you are careful enough, you will find that there are many examples in life, such as: labels on mineral water, cola, cola, sprite and other cylindrical objects. Most of these labeling machine works (some are The product of the labeling machine). The above example is just the application of the labeling machine in the beverage industry. In fact, the application field of the labeling machine is very wide. The main industries are food, beverage, pharmaceutical and other related industries.
From the development of the labeling machine to the present, after a series of improvements, the modern labeling machine combines the current advanced electronic chip technology, and the programming engineer writes a series of actions through the code into the overall control system of the labeling machine, and finally the touch screen control system on the device With the docking, the whole device is easier to operate than in the past. The use of servo motors and electric eyes has greatly improved the labeling machine's sleeve labeling speed and accuracy.
But the situation is: many water treatment, beverage industry manufacturers have reached the production stage immediately. Therefore, the demand for labeling machines will be greater, but now there are many manufacturers of high imitation labeling machines on the market. According to statistics, more than 95% of companies, labeling machine manufacturers produced by imitation assembly still have many deficiencies in independent research and development. Although many manufacturers of high imitation labeling machines can do a good job in appearance, they still inevitably have some difficulties in the use of assembled labeling machines:
1: During the operation of the labeling machine, the blade edge of the cutter returns to the original point every time it makes a revolution, it may stop in the groove of the center column, causing the film label to touch the blade and jam.
2: The groove of the center column may be "cut" by the cutter, causing the surface of the center column to be unsmooth and the subscript not smooth, causing jams.
3: Inside the cutter head group, the gap between the eccentric shaft groove and the bottom of the cutter seat is too large, resulting in uneven blades.
4: The label is too large, and the deviation between the diameter of the central column and the folding diameter of the film is too large
