العربية
The hot melt glue labeling machine can automatically adjust the in-and-out transmission of the product; the products conveyed by the conveyor belt are separated by a certain distance from the splitting screw according to the spacing of the star wheels, and then the imported star wheel transfers the container to the container turntable. After the container is fixed by the pressure bottle mechanism and the mold base of the container, the container starts to rotate at a certain speed;
Mechanical pre-positioning in the process of product rotation; and positioning and labeling according to the mechanism trajectory When the container reaches the electric eye detection position, the computer host controls the label delivery system to perform the labeling. When a labeling action is completed, the high-speed cutter puts a label. Cut off; due to the use of small inertia high-speed servo motor, guarantee the accuracy and stability of high-speed marking and cutting;
The cut label is fed into the gluing system; in this part, the system applies the two parts of the label to the end and the end of the label, and the coating method makes the consumption of the hot melt adhesive the lowest;
When the glued label is transferred to the labeling position, the label can be accurately and effectively adhered to the container; since the container is in a rotating state during the conveyance of the label, the label can be smoothly and closely pasted to the label The strip on the end of the applicator at the end of the glue can form a good label lap seal and complete a labeling process.
