العربية
When our machine is used for a period of time, there will be some garbage or dust on its surface or inside. At this time, it needs to be cleaned. The labeling machine is the same. So how to clean the self-adhesive labeling machine?
1. First remove the target plate, scraper, glue funnel, glue bucket, blow pipe, protective door, and immerse it in a immersion car (water temperature 400 ℃ -500 ℃, but the target plate must be placed separately, and no water exceeding 40 ℃ can be used). Soak only with warm water (within 40 ℃);
2. Use a wet cloth with alkaline cleaning agent water to cover the surface of the label table and the place with many adhesives;
3.Clean the large turntable, bottle holder, label sweep, label table, column door, machine roof, bottle separating plate, star wheel, guard bar and platform with a hair brush or cloth and alkaline cleaning agent water;
4. Use a damp cloth to clean the standard box, the standard drum, take the standard clip, and the residual glue of the standard rubber pad;
5. Clean the surface of the drum with a damp cloth. It is strictly forbidden to rinse with water and directly soak.
