العربية
The adjusting process the accuracy deviation of round bottle labeling machine are following,
1. Bind the labels, loosen the traction mechanism, and pull the labels back and forth to make them straighten automatically. After the labels are aligned, clamp the stop rings on both sides and guide the labels.
2. The direction of the label is not parallel to the direction of product transportation, and can be achieved by adjusting the inclination of the labeling head.
3. The traction wheel slips, the traction wheel is worn, and the traction wheel lock screw is loose. You can tighten the traction wheel lock screw.
4. In the product manufacturing process, product errors and edge errors will cause label deviation. We need to monitor the quality of the materials, and this problem will be resolved naturally.
5. The slack of the base paper of the peeling plate: The slack of the base paper and the low traction speed are related to the slip of the traction mechanism.
6. The traction speed is too low, just adjust the traction speed.
7. The traction mechanism slides, and tighten the locking screw of the traction roller until the base paper does not slide.
8. In addition, pay attention to whether the transmission belt behind the receiving shaft is broken, and if necessary, replace it in time.
9. Do regular maintenance and inspection of the round bottle labeling machine, and timely repair in case of failure can effectively prevent various problems.
