Daily maintenance of can filling production line

1. Check the ground wire of the filling machine frequently, and the contact requirements are reliable; clean the weighing platform frequently; check whether the pneumatic pipeline leaks or the air pipe is broken.
2. Change the lubricating oil of the reducer motor every year, check the tightness of the chain, and adjust the tension in time.
3. The sensor is a high-precision, high-sealing, and high-sensitivity device. It is strictly prohibited from impact and overload. It is not allowed to touch during work, and it is not allowed to be disassembled for non-maintenance.
4. If you stop using it for a long time, empty the material in the pipeline.
5. Observe the moisture filter and the oil mist device of the pneumatic combination two-parts before going to work every day. If there is too much water, it should be removed in time, and the oil level should be refueled in time;
6. During production, always observe the mechanical parts to see whether the rotation and lifting are normal, whether there are abnormalities, and whether the screws are loose;
7. Do a good job of cleaning and sanitation, keep the surface of the machine clean, frequently remove the accumulated material on the scale body, and pay attention to keeping the electric control cabinet clean